Table 1. Server specifications (continued)
Specification
Description
Input/Output (I/O) features
• Front:
– One VGA connector (optional)
– One USB 2.0 connector
– One USB 3.2 Gen 1 (5Gbps) connector
– One external diagnostics connector
– One diagnostics panel (optional)
– One LCD diagnostics panel (optional)
• Rear:
– One VGA connector
– Three USB 3.2 Gen 1 (5Gbps) connectors
– Ethernet connectors on OCP 3.0 Ethernet adapter (optional)
– One RJ45 BMC management network connector
– One serial port (optional)
For detailed information about each component, see “Front view” on page 19 and
“Rear view” on page 39.
HBA/RAID adapters
(depending on the model)
Support for JBOD mode and RAID level 0, 1, 10:
• 530-16i PCIe 12Gb RAID Adapter
Support for JBOD mode and RAID level 0, 1, 5, 10, 50:
• 530-8i PCIe 12Gb RAID Adapter
Support for JBOD mode and RAID level 0, 1, 5, 6, 10, 50, 60:
• 930-8i 2GB Flash PCIe 12Gb RAID Adapter
• 930-8e 4GB Flash PCIe 12Gb RAID Adapter
• 930-16i 4GB Flash PCIe 12Gb RAID Adapter
• 940-8i 4GB Flash PCIe Gen4 12Gb RAID Adapter
• 940-8i 8GB Flash PCIe Gen4 12Gb RAID Adapter
• 940-16i 8GB Flash PCIe Gen4 12Gb RAID Adapter
• 940-16i 8GB Flash PCIe Gen4 12Gb Internal RAID Adapter
Support the following HBAs:
• 430-8i SAS/SATA 12Gb HBA
• 430-8e SAS/SATA 12Gb HBA
• 430-16i SAS/SATA 12Gb HBA
• 430-16e SAS/SATA 12Gb HBA
• 440-16i SAS/SATA PCIe Gen4 12Gb Internal HBA
For technical rules for storage controller adapters, see “Technical rules for PCIe
adapters” on page 88.
For technical rules for RAID configuration, see “Technical rules for RAID
configuration” on page 87.
6 ThinkSystem SR630 V2 Maintenance Manual
To Next Page
Loading...
