• Be prepared to support the full weight of the compute tray when you remove it from the chassis.
• Do not use the release levers as handles to support the compute tray.
Figure 70. Compute tray removal from chassis
After you remove the compute tray:
• If you are instructed to return the compute tray, follow all packaging instructions, and use any packaging
materials for shipping that are supplied to you.
Install the compute tray (fully removed)
Install the compute tray when it is fully removed by inserting it in the front of the chassis, pushing it in until it
stops, and closing the release levers.
S002
CAUTION:
The power control button on the device and the power switch on the power supply do not turn off the
electrical current that is supplied to the device. The device also might have more than one power
cord. To remove all electrical current from the device, ensure that all power cords are disconnected
from the power source.
CAUTION:
Appendix B. Component reference 125
To Next Page
Loading...
