Lenovo x3250 m6 - Removing an Adapter

Step6.Touchthestatic-protectivepackagethatcontainsthenewopticaldrivetoanyunpaintedmetal
surfaceontheserver.Then,removetheopticaldrivefromthepackageandplaceitona
static-protectivesurface.
Step7.Followtheinstructionsthatcomewiththeopticaldrivetosetanyjumpersorswitches.
Step8.Attachthedriveretentionclipthatyouremovedfromtheopticaldrivefillertothesideofthe
newopticaldrive.Ensurethatthealignmentpins1ontheretentioncliparealignedwiththe
correspondingholesintheopticaldrive.
Figure40.Opticaldriveretentionclipinstallation
Step9.Aligntheopticaldrivewiththedrivebay.Then,slidetheopticaldriveintothebayuntiltheoptical
driveclicksintoplace.
Figure41.Opticaldriveinstallation
Step10.Completethepartsreplacement.See“Completingthepartsreplacement”onpage172.
Step11.Reinstallthesecuritybezel.See“Installingthesecuritybezel”onpage92.
Removinganadapter
Toremoveanadapter,dothefollowing:
Step1.Turnofftheserver.Then,disconnectallexternalcablesandremoveallperipheraldevices.
Step2.Removetheservercover.See“Removingtheservercover”onpage88.
Step3.RemovethePCIriser-cardassembly.See“RemovingthePCIriser-cardassembly”onpage93.
110LenovoSystemx3250M6InstallationandServiceGuide