Figure57.Operatingtemperatureenhancementkitremoval
Step6.Completethepartsreplacement.See“Completingthepartsreplacement”onpage172.
Installingtheoperatingtemperatureenhancementkit
Toinstalltheoperatingtemperatureenhancementkit,dothefollowing:
Step1.Turnofftheserver.Then,disconnectallexternalcablesandremoveallperipheraldevices.
Step2.Removetheservercover.See“Removingtheservercover”onpage88.
Step3.RemovethePCIriser-cardassembly.See“RemovingthePCIriser-cardassembly”onpage93.
Step4.Connecttheoperatingtemperatureenhancementkitconnectortothesystemboard.
Step5.Routethecablealongthechassis.Makesuretherelevantcablespassthroughthecableclips.
Figure58.Operatingtemperatureenhancementkitcableconnectionfor2.5-inch-drivemodel
Chapter7.Removingandinstallingservercomponents123
To Next Page
Loading...
