Lenz digital plus lh01 - Locomotive Control and Management; Controlling Locomotives: Speed and Direction

13
7 Controlling locomotives
7.1 Changing the speed step
During the first operation, the LH01 uses locomotive address 3 which
is shown in the display.
Turn the rotary knob to change the speed step for this locomotive
address:
Action
Display
Explanation
Turn the rotary knob one ‘click’ to the right or
left to display the current speed step of the
locomotive.
A turn clockwise will increase the speed step.
A turn counter clockwise will decrease the
speed step …
… down to a standstill.