46 Information LH01
13.3 Setting the language
Proceed from ‘Locomotive control’ (address
or speed step are displayed)…
… press the bottom of the rotary knob until
the LED at the bottom shines.
‘SYS’ is displayed, followed by the first sub
menu of the system settings.
Press the bottom of the rotary knob. The
language currently set is displayed.
Turn to select German (DE) or English (EN).
Press the centre of the rotary knob to confirm
your selection.
Turn to select another system setting or press
'Esc' to return to ‘Locomotive control’.
To Next Page
Loading...
