2 Information LH01
Table of contents
1 Welcome! ........................................................................................ 4
2 Important advice, please read first! ................................................ 5
3 Overview of the features of the LH01 ............................................. 6
4 Operating elements of the LH01 ..................................................... 9
5 Connection and initial operation ................................................... 10
6 Emergency shutdown ................................................................... 12
7 Controlling locomotives ................................................................. 13
7.1 Changing the speed step ....................................................... 13
7.2 Changing the direction of travel / Emergency stop ................ 14
8 Selecting locomotives ................................................................... 15
8.1 Selecting a locomotive address from the stack ..................... 15
8.2 Entering a new locomotive address into the stack ................ 16
8.3 Deleting a locomotive address from the stack ....................... 18
9 Locomotive functions .................................................................... 19
9.1 Switching locomotive functions with function keys ................ 19
9.2 Switching locomotive functions with the rotary knob ............. 20
9.3 Assigning locomotive functions to function keys ................... 21
9.4 Setting a locomotive function to permanent or temporary
operation ................................................................................ 22
9.5 Assigning function acronyms to locomotive functions ........... 24
9.6 Deleting a function acronym .................................................. 26
9.7 Changing a function acronym ................................................ 27
9.8 Deleting all function acronyms ............................................... 28
10 Double traction (Double Header) .................................................. 29
10.1 Requirements to assemble a double traction ........................ 29
10.2 Assembling two locomotives in a double traction .................. 29
10.3 Deleting a double traction ...................................................... 31
10.4 Error messages during double tractions ................................ 32
11 Switching points and signals ......................................................... 33
12 Setting (programming) locomotive decoders (PoM) ..................... 34
12.1 Reading CVs via PoM and the address display LRC120 ...... 36
13 System settings ............................................................................. 38
To Next Page
Loading...
Need help?
General
