Lenz digital plus lh01 - System Settings and Configuration

38 Information LH01
13 System settings
The system settings are accessed from the top operating level, the
locomotive control.
Action
Display
Explanation
Press the bottom of the rotary knob
until the LED at the bottom shines.
‘SYS’ is displayed, followed by the
first sub menu of the system
settings.
Turn to select one of the following
system settings:
Setting and reading a locomotive
address on the programming track
Setting and reading the XpressNet
address
Language settings
Resetting the LH01
Resetting the command station
(LZV100/LZ100)
Displaying the version number of the
LH01
Displaying the version number of the
command station