Lenz digital plus lh01 - List of Error Messages

58 Information LH01
14.2 List of error messages
Error
Error:
ER01
Programming information: short circuit
ER02
Programming information: no information
ER06
Value outside permissible range
ER07
Command station ready
ER24
DTR/MTR: Locomotive not called up or locomotive address 0
ER25
DTR/MTR: Locomotive called up by another device
ER26
DTR/MTR: Locomotive part of another DTR/MTR
ER27
DTR/MTR: Locomotive speed not 0
ER28
DTR/MTR: Locomotive not part of multiple traction
ER29
DTR/MTR: Locomotive address no multiple traction basic address
ER30
Locomotive cannot be deleted from memory
ER31
Central memory full
ER40
Flash cannot be deleted
ER41
Time-out
ER42
Command station incompatible
ER43
Software incompatible
ER44
Speed step not supported
ER45
Error in locomotive stack
ER80
Transmission error
ER97
Error in data processing at command station LZ100/LZV100
ER98
Command sent to command station by manual control not part of
command range
ER99
General system error