Lenze i510 - Page 123

9 Troubleshooting
Error messages
Lenze · Inverter i510 / i550 - Cabinet · Operation Manual · 0.4 EN · 02/2016 123
0x7692
30354
Error
User CU not matc
New FW type detected. The FW type is compatible
to the currrent used EPM.
Fault reaction:
The data will load to RAM.
Troubleshooting:
Accept new FW type (P700:27) (Changes in pa-
rameter setting).
Alternative: Load factory settings (P700:1).
0x7693
30355
Error
EPM PU size inco
The PU type does not match to the current used
EPM data.
Fault reaction:
The data will load to RAM.
Troubleshooting:
Factory setting need to be loaded (P700:1)
0x7694
30356
Error
EPM new PU size
New PU type detected. The PU type is compatible
to the currrent used EPM.
Fault reaction:
The data will load to RAM.
Troubleshooting:
Accept new PU type (P700:27) (Changes in param-
eter setting).
Alternative: Load factory settings (P700:1).
0x7695
30357
Warning
InvalidChgovrCfg
One or more parameter are not usable for the pa-
rameter changeover.
Fault reaction:
Parameter changeover is disabled.
Troubleshooting:
Check fault status in P756:1 and correct the wrong
index indicated in P756:2.
0x7697
30359
Error
Param. lost
EPM data: Lost modified parameters because of
24V power-cycling
0x8112
33042
Configurable
TO expl. msg
Fieldbus - Timeout explicit message (P515:6)
0x8114
33044
Configurable
TO overall comm
Fieldbus - Overall communication timeout (P515:7)
0x8182
33154
Configurable
CAN bus off
CAN bus off. (0x2857:10)
0x8183
33155
Configurable
CAN bus warning
CAN warning. (0x2857:11)
0x8184
33156
Configurable
CAN heartb. C1
CAN heartbeat time-out consumer 1. (0x2857:5)
0x8185
33157
Configurable
CAN heartb. C2
CAN heartbeat time-out consumer 2. (0x2857:6)
0x8186
33158
Configurable
CAN heartb. C3
CAN heartbeat time-out consumer 3. (0x2857:7)
0x8187
33159
Configurable
CAN heartb. C4
CAN heartbeat time-out consumer 4. (0x2857:8)
0x8190
33168
Configurable
Watchdog timeout
Fieldbus watchdog expired. (P515:1)
0x8191
33169
Configurable
Cycl data error
Fieldbus disruption of cyclic data exchange.
(P515:2)
0x8192
33170
Configurable
Net. Init. error
Fieldbus communication stack initialization error
(P515:4)
0x8193
33171
Configurable
Inv. cyclic data
Fieldbus invalid cyclic process data. (P515:5)
0x81A0
33184
Warning
Modbus TX error
Modbus transmit message ring buffer error
0x81A1
33185
Configurable
Timeout Modbus
Modbus network time-out. (P515:1-2)
0x81A2
33186
Warning
Modbus request
Modbus wrong request from master
0x8286
33414
Configurable
PDO map error
Fieldbus PDO mapping error. (P515:3)
0x8291
33425
Configurable
Timeout RPDO1
CAN time-out Rx PDO 1 (0x2857:1)
0x8292
33426
Configurable
Timeout RPDO2
CAN time-out Rx PDO 2 (0x2857:2)