Leuze BPS 8 - Device Configuration and Parameters; RS 232;RS 485 Interface Configuration

Configuration / device parameters
Leuze electronic BPS 8 61
TNT 35/7-24V
8 Configuration / device parameters
8.1 RS 232/RS 485 interface
8.1.1 General information
The BPS 8 system is supplied with an RS 232 interface. Using the MA 8-01 or the MA 8-02
permits this to be replaced by an RS 485 interface. All settings regarding the protocols and
device parameters may be individually configured using the BPS Configuration Tool soft-
ware.
The current version of the BPS Configuration Tool can be downloaded from the Leuze home
page at www.leuze.com.
Detailed information on the electrical connection can be found in Chapter 7 "Electrical
connection" on page 48.