Configuration / device parameters
Leuze electronic BPS 8 71
TNT 35/7-24V
8.5 Detailed description of the tabs
Within the tabs, the parameters are labeled alphanumerically from ... .
Example:
The parameter Preset value static [mm] is activated only if the preset teaching is carried
out via switching input .
NOTE
Note cross-references to parameters!
In the following detailed descriptions of the tabs you will find in the last column of the tables
cross references (CR) to parameters and input/output data of other tabs which are
directly related to the described parameter.
Pay attention to these cross-references during configuration.
To Next Page
Loading...
