Page 37
OUTPUT TYPES
An output type must be specified for each of the voltage outputs and for the interior and exterior horn outputs. The
following output types are available:
OUTPUT TYPE NUMBER DESCRIPTION
GENERAL PURPOSE 0 General Purpose Output
OK TO ARM 1 OK To Arm
ARMED 2 Armed
PRE-ALM SNDR 3 Pre-Alarm Sounder
INT SNDR 4 Interior Sounder
INT BURG SNDR 5 Interior Burglary Sounder
INT FIRE SNDR 6 Interior Fire Sounder (3 pulse temporal pattern)
EXT SNDR 7 Exterior Sounder
EXT BURG SNDR 8 Exterior Burglary Sounder
EXT FIRE SNDR 9 Exterior Fire Sounder (3 pulse temporal pattern)
BURG COMM 10 Burglary Communicator
FIRE COMM 11 Fire Communicator
AUX COMM 12 Auxiliary Communicator
SWITCHED POWER 13 Switched Power Output
The Setup Control items are:
OUTPUT 1 TYPE: 0
GENERAL PURPOSE #=CHNG
OUTPUT 2 TYPE: 0
GENERAL PURPOSE #=CHNG
OUTPUT 3 TYPE: 0
GENERAL PURPOSE #=CHNG
OUTPUT 4 TYPE: 0
GENERAL PURPOSE #=CHNG
OUTPUT 5 TYPE: 0
GENERAL PURPOSE #=CHNG
OUTPUT 6 TYPE: 0
GENERAL PURPOSE #=CHNG
OUTPUT 7 TYPE: 0
GENERAL PURPOSE #=CHNG
OUTPUT 8 TYPE: 0
GENERAL PURPOSE #=CHNG
INTERIOR HORN: 4
INT SNDR #=CHNG
EXTERIOR HORN: 7
EXT SNDR #=CHNG
↑
To Next Page
Loading...
