18
ENFRDECZSKFREEFREE PL
Battery liquid can cause skin irritation and burns. In the event of damage that results in skin or eye contact with
any liquid from the battery, immediately flush with water and seek medical assistance.
Turn off the battery and unplug the charger or RE from the charge port before performing work of any kind, such
as installation, maintenance, cleaning and/or repair. Touching the contacts when the bicycle is ON can result in
electric shock and/or injury.
WARNING! Failure to follow the instructions in this section may result in damage to electrical
components on your bicycle and will void your warranty, but, most importantly, may result in
serious personal injury or death. If your battery or charger exhibits any signs of damage, do not
use it and immediately bring it to your Authorized Specialized Retailer for inspection.
9.1. CHARGING AND USING THE BATTERY
Regularly inspect the battery and charger for damage. Never charge a battery which you suspect is damaged or
know is broken, and do not use it.
Make sure the charging socket and plug are clean and dry before connecting and charging the battery.
Only use the supplied charger cord. Ensure the cord plug is fully inserted in the charger before plugging the
charger into a power outlet.
Only use the Specialized charger supplied with the bicycle or other chargers approved by Specialized. Inspect
the charger before every use for possible damage to the charger itself, the cable or the charging plug. Never use
a charger which you suspect is damaged or know is broken.
You should charge the battery in a dry, well ventilated area and make sure the battery and charger are uncovered
during the charging process. Ensure that the battery and charger are not exposed to any flammable or
dangerous substances.
WARNING! Failure to follow the instructions in this section may result in damage to electrical
components on your bicycle and will void your warranty, but, most importantly, may result in
serious personal injury or death. If your battery or charger exhibits any signs of damage, do not
use it and immediately bring it to your Authorized Specialized Retailer for inspection.
9.2. CHARGING THE BATTERY
WARNING! Place the charger and battery if removed from the frame on a stable, level surface
unaffected by heat. You should charge the battery in a dry, well ventilated area and make sure the
charger is uncovered during the charging process. Ensure that the battery and charger are not
exposed to any flammable or dangerous substances. Plug the charger’s plug into an outlet (100
- 240V), using the appropriate plug for the country’s standards, then connect the charging plug
with the charging socket on the battery. Specialized recommends charging the battery in an area
with a smoke detector.
CAUTION: Always turn off the bicycle before plugging or unplugging the charger or RE!
INFO: Only charge the battery at an ambient temperature between 0° C and +45° C (+32° F and
+113° F). If outside temperatures are too hot or too cold, charge the battery inside. For safety
reasons, if the battery is too hot or too cold, it will not charge.
Plug the charger’s plug into an outlet (100 - 240V), using the appropriate plug for the country’s standards.