Levo SL - Shock Setup Data; Specifications; General Specifications; Extension @ Shock and Flip Chip

24
ENFRDECZSKFREEFREE PL
control on variable terrain.
 LOCK: The firmest low-speed compression setting is activated for maximum pedaling efficiency.
10.4. SHOCK SETUP DATA
DATE
RIDER WEIGHT
FORK PSI
FORK REBOUND (# of clicks from full slow)
FORK COMPRESSION (# of clicks from full firm)
SHOCK PSI
SHOCK REBOUND (# of clicks from full slow)
SHOCK COMPRESSION (# of clicks from full firm)
11. SPECIFICATIONS
11.1. GENERAL SPECIFICATIONS
ITEM PART NUMBER SPECIFICATION
HEADSET S182500005 1 1/8” UPPER / 1.5” LOWER DROP-IN BEARINGS
SEAT COLLAR DIAMETER S184700004 38.6
SEATPOST DIAMETER 34.9
DERAILLEUR HANGER S172600001 HGR MY18 MTB THRU AXLE DER HANGER
REAR HUB S170200003 AXL MY17 EPIC HT THRU-AXLE 148MM X 12MM
The specs below are the stock configurations for each model.
MODEL
WHEEL /
TIRE
SHOCK
TRAVEL
SHOCK
EXTENSION
1
SHOCK
STROKE
FORK
TRAVEL
BB
HEIGHT
1
HEAD TUBE
ANGLE
1
LEVO SL 29 x 2.3 150
110 / 113
210 x 52.5 150
340 / 348 66 / 66.5
1
The shock extension length, bottom bracket (BB) height and head tube angle all have two settings based on the
Flip Chip position. The stock configuration for the Flip Chip is in the lower position (highlighted in BOLD).
11.2. EXTENSION @ SHOCK AND FLIP CHIP
FLIP CHIP
DO NOT TORQUE UNTIL THE
REAR TRIANGLE IS ASSEMBLED
AND TORQUED!
HIGH \ LOW
POSITION
11.1