EasyManuals Logo

Lexmark C950 Series User Manual

Lexmark C950 Series
275 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #117 background imageLoading...
Page #117 background image
Menu item Description
USB Buffer
Auto
3KB to [maximum size allowed]
Disabled
Sets the size of the USB input buffer
Notes:
Auto is the factory default setting.
Disabled turns off job buffering. Any jobs already buffered on the printer hard
disk are printed before normal processing resumes.
The USB buffer size value can be changed in 1-KB increments.
The maximum size allowed depends on the amount of memory in the printer,
the size of the other link buffers, and whether Resource Save is set to On or
Off.
To increase the maximum size range for the USB Buffer, disable or reduce the
size of the parallel, serial, and network buffers.
Changing this setting from the printer control panel and then exiting the
menus causes the printer to restart. The menu selection is then updated.
Job Buffering
Off
On
Auto
Temporarily stores print jobs on the printer hard disk before printing
Notes:
Off is the factory default setting.
On buffers jobs on the printer hard disk.
Auto buffers print jobs only if the printer is busy processing data from another
input port.
Changing this setting from the printer control panel and then exiting the
menus causes the printer to restart. The menu selection is then updated.
Mac Binary PS
Auto
On
Off
Sets the printer to process Macintosh binary PostScript print jobs
Notes:
Auto is the factory default setting.
On processes raw binary PostScript print jobs.
Off filters print jobs using the standard protocol.
ENA Address
yyy.yyy.yyy.yyy
Sets the network address information for an external print server
Note: This menu item is available only if the printer is attached to an external print
server through the USB port.
ENA Netmask
yyy.yyy.yyy.yyy
Sets the netmask information for an external print server
Note: This menu item is available only if the printer is attached to an external print
server through the USB port.
ENA Gateway
yyy.yyy.yyy.yyy
Sets the gateway information for an external print server
Note: This menu item is available only if the printer is attached to an external print
server through the USB port.
Understanding printer menus 117

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lexmark C950 Series and is the answer not in the manual?

Lexmark C950 Series Specifications

General IconGeneral
Print TechnologyColor Laser
Print Resolution1200 x 1200 dpi
Monthly Duty CycleUp to 300, 000 pages
Standard Output Capacity500 sheets
Duplex PrintingYes
Processor Speed1.2 GHz
Operating System CompatibilityWindows, Mac OS, Linux
Print SpeedUp to 50 ppm
Memory1024 MB (Upgradable to 2048 MB)
ConnectivityUSB, Ethernet
Media Sizes SupportedA3, A4, A5, Executive, Folio, Legal, Letter, Statement, Universal
Standard Input Capacity620 sheets
Max Paper Capacity5, 140 sheets

Related product manuals