Lexmark C950 Series User Manual

5 Push the memory card into the connector until it clicks into place.
Installing a flash memory or firmware card
The system board has two connections for an optional flash memory or firmware card. Only one of each may be installed,
but the connectors are interchangeable.
CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory
devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the
wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well,
and unplug any cables going into the printer.
Warning—Potential Damage: System board electronic components are easily damaged by static electricity. Touch
something metal on the printer before touching any system board electronic components or connectors.
1 Access the system board.
For more information, see
“Accessing the system board” on page 23.
Notes:
• This task requires a flathead screwdriver.
• Do not unplug the fan cable upon opening the metal panel.
2 Unpack the card.
Note: Avoid touching the connection points along the edge of the card.
Additional printer setup 27

Lexmark C950 Series Specifications

General

Print Technology	Color Laser
Print Resolution	1200 x 1200 dpi
Monthly Duty Cycle	Up to 300, 000 pages
Standard Output Capacity	500 sheets
Duplex Printing	Yes
Processor Speed	1.2 GHz
Operating System Compatibility	Windows, Mac OS, Linux
Print Speed	Up to 50 ppm
Memory	1024 MB (Upgradable to 2048 MB)
Connectivity	USB, Ethernet
Media Sizes Supported	A3, A4, A5, Executive, Folio, Legal, Letter, Statement, Universal
Standard Input Capacity	620 sheets
Max Paper Capacity	5, 140 sheets