Lexmark C950 Series User Manual

MAKE SURE THE PHOTOCONDUCTOR UNIT IS NOT WORN OR DEFECTIVE
Replace the word or defective photoconductor unit.
MAKE SURE THE FUSER IS NOT WORN OR DEFECTIVE
Replace the worn or defective fuser.
MAKE SURE THE PRINTER HAS RECALIBRATED RECENTLY
Perform color adjust from the Quality menu.
MAKE SURE THE APPLICATION HAS NOT SPECIFIED AN OFF‑WHITE BACKGROUND
Check the application settings.
MAKE SURE NO TONER IS IN THE PAPER PATH
Contact customer support.
Toner rubs off
Try one or more of the following:
CHECK THE PAPER TYPE AND WEIGHT SETTINGS
Make sure the paper type and weight settings match the paper loaded in the tray or feeder:
1 From the printer control panel Paper menu, check the Paper Type and Paper Weight settings. Change the Paper
Weight setting from Normal to Heavy.
2 Before sending the print job, specify the correct paper type setting:
• For Windows users, specify the paper type from Print Properties.
• For Macintosh users, specify the paper type from the Print dialog.
CHECK THE PAPER TEXTURE SETTING
From the printer control panel Paper menu, make sure the Paper Texture setting matches the paper loaded in the
tray or feeder. If necessary, change the Paper Texture setting from Normal to Rough.
Troubleshooting 247

Lexmark C950 Series Specifications

General

Print Technology	Color Laser
Print Resolution	1200 x 1200 dpi
Monthly Duty Cycle	Up to 300, 000 pages
Standard Output Capacity	500 sheets
Duplex Printing	Yes
Processor Speed	1.2 GHz
Operating System Compatibility	Windows, Mac OS, Linux
Print Speed	Up to 50 ppm
Memory	1024 MB (Upgradable to 2048 MB)
Connectivity	USB, Ethernet
Media Sizes Supported	A3, A4, A5, Executive, Folio, Legal, Letter, Statement, Universal
Standard Input Capacity	620 sheets
Max Paper Capacity	5, 140 sheets