Menu item Description
Automatic Method
Single pass
Multiple pass
Automatic wiping marks all disk space used by a previous print job and does not
permit the file system to reuse this space until it has been cleared.
Only Automatic wiping enables users to activate disk wiping without having to turn
the printer off for an extended amount of time.
Notes:
• “Single pass” is the factory default setting.
• Highly confidential information should be wiped using only the Multiple pass
method.
Manual Method
Single pass
Multiple pass
Both manual and scheduled wiping allow the file system to reuse marked disk space
without having to wipe it first.
Notes:
• “Single pass” is the factory default setting.
• Highly confidential information should be wiped using only the Multiple pass
method.
Scheduled Method
Single pass
Multiple pass
Both manual and scheduled wiping allow the file system to reuse marked disk space
without having to wipe it first.
Notes:
• “Single pass” is the factory default setting.
• Highly confidential information should be wiped using only the Multiple Pass
method .
• Scheduled wipes are initiated without displaying a user warning or
confirmation message.
Security Audit Log menu
Menu item Description
Export Log Enables an authorized user to export the audit log
Notes:
• To export the audit log from the printer control panel, a flash drive must be
attached to the printer.
• From the Embedded Web Server, the audit log can be downloaded to a
computer.
Delete Log
Yes
No
Specifies whether audit logs are deleted
Note: “Yes” is the factory default setting.
Understanding printer menus 126
To Next Page
Loading...
Need help?
General
