Lexmark C950 Series - Supported Paper Sizes, Types, and Weights

Supported paper sizes, types, and weights
The following tables provide information on standard and optional paper input sources and the types of paper they
support.
Note: To use a paper size that is unlisted, configure a Universal Paper Size.
For more information, see the Card Stock & Label Guide available on the Lexmark Web site at
http://support.lexmark.com.
Supported paper sizes
Paper size and dimension 520‑sheet tray
2,000‑sheet
drawer
MP feeder
Manual
paper
Manual
envelope
Duplex
A4
210 x 297 mm (8.27 x 11.7 in.)
1 1,6 2,6 2,6
X
2
A5
148 x 210 mm (5.83 x 8.27 in.)
1,5
X
2,5 2,5
X
2,5
A6
105 x 148 mm (4.13 x 5.83 in.)
XX
2 2
XX
JIS B5
182 x 257 mm (7.17 x 10.1 in.)
1,6 1,6 2,6 2,6
X
2,6
Letter
216 x 279 mm (8.5 x 11 in.)
1 1,6 2,6 2,6
X
2
Legal
216 x 356 mm (8.5 x 14 in.)
1
X
2 2
X
2
Executive
184 x 267 mm (7.25 x 10.5 in.)
1,6 1,6 2,6 2,6
X
2,6
JIS B4
257 x 364 mm (10.12 x 14.33 in.)
1
X
2 2
X
2
A3
297 x 420 mm (11.69 x 16.54 in.)
1
X
2 2
X
2
SRA3
320 x 450 mm (12.6 x 17.7 in.)
7
X
2 2
X
2
1
Source supports size with size sensing.
2
Source supports size without size sensing.
3
Paper size is supported if set to metric.
4
Paper size is supported if set to US.
5
Paper size is supported if loaded in the short‑edge orientation. The short edge of the paper enters the printer first.
6
Paper size is supported if loaded in the long‑edge orientation. The long edge of the paper enters the printer first.
7
This is applicable only to the optional 520‑sheet tray.
Paper and specialty media guide 79