blank pages 237
characters have jagged edges 237
clipped images 238
fine horizontal lines 238
gray background on prints 239
light colored line, white line, or
incorrectly colored line appears
on prints 240
poor transparency quality 248
print irregularities 241
print is too dark 242
print is too light 243
repeating defects appear on a
page 243
shadow images appear on
prints 238
skewed print 244
solid color pages 245
streaked horizontal lines appear
on prints 246
toner fog or background shading
on the page 246
toner rubs off 247
white streaks on a page 245
print quality, troubleshooting
cleaning the printhead lenses 157
Print quota exceeded. Print job
canceled. 219
Print quota exceeded. Print job
incomplete. 219
print troubleshooting
error reading flash drive 227
held jobs do not print 228
incorrect characters print 229
incorrect margins 239
jammed pages are not
reprinted 236
job prints from wrong tray 229
job prints on wrong paper 229
jobs do not print 227
Large jobs do not collate 230
multiple‑language PDF files do not
print 227
paper curl 241
paper frequently jams 236
print job takes longer than
expected 229
tray linking does not work 229
unexpected page breaks
occur 230
printer
basic model 11
fully configured 11
minimum clearances 9
moving 9, 187
selecting a location 9
shipping 187
turning on 22
printer configurations 11
printer control panel
adjusting brightness 59
factory defaults, restoring 189
using 14
printer hard disk
disposing of 154
encrypting 156
installing 31
removing 35
troubleshooting 234
wiping 155
printer hard disk encryption 156
printer hard disk memory
erasing 155
printer information
where to find 8
printer messages
1565 Emulation error, load
emulation option 227
31.xx Missing or Defective [color]
cartridge 219
32.xx [color] cartridge part
number unsupported by
device 219
34 Incorrect paper size, check
[paper source] 220
34 Incorrect paper type, check
[paper source] 220
35 Insufficient memory to support
Resource Save feature 220
37 Insufficient memory for Flash
Memory Defragment
operation 221
37 Insufficient memory to collate
job 221
37 Insufficient memory, some
Held Jobs were deleted 220
37 Insufficient memory, some held
jobs will not be restored 220
38 Memory full 221
39 Complex page, some data may
not have printed 221
40 [color] invalid refill, change
cartridge 221
51 Defective flash detected 221
52 Not enough free space in flash
memory for resources 221
53 Unformatted flash
detected 222
54 Network [x] software error 222
54 Serial option [x] error 222
54 Standard network software
error 222
55 Unsupported option in slot
[x] 222
56 Parallel port [x] disabled 223
56 Serial port [x] disabled 223
56 Standard parallel port
disabled 223
56 Standard USB port
disabled 223
56 USB port [x] disabled 223
57 Configuration change, some
held jobs were not restored 223
58 Too many disks installed 224
58 Too many flash options
installed 224
58 Too many trays attached 224
59 Incompatible tray [x] 224
61 Remove defective disk 224
62 Disk full 225
80 Replace paper pick rollers in
[paper source] 225
80 Scheduled maintenance
[x] 225
82.xx Replace waste toner
bottle 225
82.xx Waste toner bottle
missing 225
82.xx Waste toner bottle nearly
full 225
84 Replace black pc unit 166
84 Replace color pc units 166
84 unsupported [color]
photoconductor 225
84.xx [color] photoconductor
low 226
84.xx [color] photoconductor
missing 226
84.xx Replace [color]
photoconductor 226
88 Replace [color] cartridge 226
88.xx [color] cartridge low 226
an error has occurred with the
flash drive 213
Bin 2 is unable to lower 213
Index
272
To Next Page
Loading...
Need help?
General
