Warning—Potential Damage: System board electronic components are easily damaged by static electricity. Touch
something metal on the printer before touching any system board electronic components or connectors.
1 Access the system board.
For more information, see
“Accessing the system board” on page 23.
2 Remove the printer hard disk.
For more information, see
“Removing a printer hard disk” on page 35
3 Unpack the ISP kit.
2
3
4
1
1 ISP solution
2 Screws for the ISP solution
3 Screws for the plastic bracket
4 Plastic bracket
4 Use the provided screws to attach the plastic bracket to the ISP solution.
Additional printer setup 29
To Next Page
Loading...
