EasyManua.ls Logo

Lexmark E240n

Lexmark E240n
259 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4511-xxx
2-74 Service Manual
84 xx 2C x1
x2 x3
Unrecoverable no gap jam. Engine
detected no gap at the manual feeder
sensor, attempted to open the gap by
stopping the feed rolls, but no trailing
edge was ever seen at the input sensor.
(x1=media size, x2=media source,
x3=LastdetectedSize)
84 xx 2D x1
x2 x3
Misidentified no gap jam. Engine detected
no gap at the manual feeder sensor,
attempted to open the gap by stopping
the feed rolls, trailing edge was seen at
the input sensor, manual feeder sensor is
no longer covered.
(x1=media size, x2=source,
x3=LastDectedSize)
84 xx 2E x1
x2 00
Failed no gap jam recovery. Engine
detected no gap at the manual feeder
sensor, opened the gap by stopping the
feed rolls, but never saw the leading edge
of the second page at the input sensor.
(x1=RecoveryStatus, x2-source)
84 xx 2F x1
x2 x3
Laser servo never started due to potential
conflict with the transfer servo.
(x1=bit 0: transfer servo started,
bit 1: transport started; x2+x3=transfer
servo count value.)
Possible causes are:
Slow or missing transport motor
positional feedback.
Media arrives too early at the input
sensor.
200
Sub error codes (continued)
First 6 bytes sub
error code data
(xx can be any
value)
Explanation
Possible
error
message

Table of Contents

Other manuals for Lexmark E240n

Related product manuals