4511-xxx
3-6 Service Manual
Configuration menu selections
To enter Configuration menu, turn off the printer, open the front access
cover, turn on the printer while pressing and holding , and close the
cover once the light displays.
Print menus by pressing and holding until the lights flash.
Utilities
Use the Utilities menu to troubleshoot printer problems.
Setting Use setting to Values
Reset
Factory
Defaults
Return the printer settings to factory default values.
Sometimes resetting the printer to the original settings solves
formatting problems.
All menu items are reset to the factory default values except:
• Display Language.
• All settings in the Parallel menu, Network menu, LocalTalk
menu, and USB menu.
• All downloaded resources (fonts, macros, and symbol
sets) in printer memory (RAM) are deleted.
Resources in flash memory are unaffected.
Hex Trace Help isolate printing
problems when
unexpected characters
print or characters are
missing.
Hex Trace helps
determine if there is a
problem with the
language interpreter or
the cable by providing
information about what
the printer is receiving.
To exit Hex Trace, turn off
the printer.
Off (default)
On
To Next Page
Loading...
