Lexmark E240n

4511-xxx
3-12 Service Manual
Development (continued)
Parallel
Menu item Use setting to Value
Continuous
print—
simplex
Tray 2
Continuously print pages
containing cross lines,
printer information, and
margin settings.
This menu item does not
appear if Tray 2 is not
installed.
Press and hold until
the lights flash to begin.
Press
to stop.
Print History Print history of errors.
Press and hold until
the lights flash to print.
Defaults Change sizes and
designations to metric.
U.S. (default)
Non-U.S.
Configuration
ID
Allow the printer ID to
match the label ID after
the controller card is
replaced.
000101 (default)
000189
Menu item Use setting to Value
Par S Strobe
Adjustment
Adjust for an unusually
long parallel cable.
(Parallel mode 2 only is
supported and can be
turned off in the
configuration group.)
Range from -1 to 3,
0 is default.