Lexmark E240n User Manual

4511-xxx
Diagnostic aids—E238, E240, and E240n
3-7
Setup
Use the Setup menu to configure how the printer formats the end of a line
depending on the computer system being used.
Print Quality
Test Pages
Help isolate print quality problems, such as streaking. Four
pages print to help evaluate print quality:
• A text page with printer information, cartridge information,
current margin settings, and a graphic.
• One page is gray with graphics, one is black, and one is
blank.
Reset Photo-
conductor
Counter
Return the photoconductor counter to zero.
The replace photoconductor message should be cleared only
when the photoconductor kit has been replaced.
Menu item Use setting to Values
Demo Mode Put printer into demo
mode where internal
sheets print with each
press of .
To deactivate, turn the
printer off, and re-enter
configuration group. Set
to deactivate.
Deactivate (default)
Activate
Auto CR
After LF
Specify whether the
printer automatically
performs a carriage
return after a line feed
control command.
Off (default)
On
Auto LF after
CR
Specify whether the
printer automatically
performs a line feed after
a carriage return control
command.
Off (default)
On
Setting Use setting to Values

Lexmark E240n Specifications

General

Brand	Lexmark
Model	E240n
Category	Printer
Language	English