3-36 Service Manual
4500–E220/E321/E323
Configuration menu group or diagnostic menu group
Correct entry of either mode is indicated with the four top lights on.
Press and hold Continue (about 4 seconds) for the printer to
produce a page similar to the ones on page 3-38 and page 3-39,
depending on which mode is entered.
Note: For information on how to enter the configuration or
diagnostic modes, see “Using the special function menu
(E220/E321/E323)” on page 2-106.
Moving around the menu
“Printer settings configuration” on page 3-38 and “Printer
diagnostics” on page 3-39, are similar to the instructions printed
by following step 4 on page 2-106. These menu items are
designated by the non–indented items listed along the left edge of
the page. (Bottom as printed from printer.) These items are also un–
shaded.
• Press and release Cancel to move sequentially from one menu
item to another.
• Press and hold Cancel to jump to home state (top four lights
on).
• Press and release Continue to move through the menu settings
(indicated by Error and Press Continue lights).
This action rotates only through the possible settings of the
selected menu item.