Diagnostic information 2-11
4500–E320/E322
Service error codes
Software service error code
The operator panel button has been pushed and a secondary
service error has occurred indicating a software error.
Once the error code is displayed, if the operator panel button is
pushed again, the operator panel will display the service error
indication (all six indicator lights blinking). Continual pressing of the
operator panel button causes the lights to repeat in the following
order:
1. Service error indication
2. Software service error code indication
3. Service error indication
Place the printer into the special function menu and run a print test.
See “Using the special function menu (E320/E322) ” on
page 2-105 for more information. If the printer does not run printer
diagnostics, replace the controller card.
To Next Page
Loading...
