Diagnostic information 2-51
4500–E220/E321/E323
Transport motor error
Indicates a problem with the main drive motor system. The problem
could be the motor, the controller card, the cabling, or the drive
assembly. Check the cable connectors. The tertiary code below, with
four flashing lights indicates a problem in the drive assembly.
RIP to engine communication failure (controller card)
Indicates that the RIP processor cannot communicate with the
engine processor.
Transport motor
lost lock (937).
Transport motor initial
lock failure (936).
Ready/Data
Press Continue
Toner Low
Load/
Remove Paper
Paper Jam
Error
Ready/Data
Press Continue
Toner Low
Load/
Remove Paper
Paper Jam
Error
Ready/Data
Press Continue
Toner Low
Load/
Remove Paper
Paper Jam
Error
Primary Code Secondary Code Tertiary Codes
(939)
To Next Page
Loading...
