3. AC Smart Menu
AC Smart
3-56
Check box for the model to be locked in detail
If the unit is the model supporting the detailed lock function, check the check box of the ‘model to be
locked in detail’.
When this function is set, you can set the following detailed lock function at ‘Control/Monitoring’ menu
and ‘Schedule’ menu.
• Lock/Unlock all functions, Lock/Unlock the mode,
Lock/Unlock Wind flow and Lock/Unlock the set temperature
When the detailed lock function is not supported, you can only set to lock/unlock all functions.
Unit management button
When [Unit management] button is pressed, ‘Unit management’ is displayed to register, modify, delete
or rename the unit.
Note: Using the detailed lock and the unit management function
Only when logged in as installation professional mode, ‘Model to be locked in detail’ check box and
‘Unit management’ button are displayed and these functions can be used.
To Next Page
Loading...
