3. AC Smart Menu
Installation/Owner's Manual
3-1
3. AC Smart Menu
AC Smart is composed of the following 6 menus.
• Control/Monitoring
• Schedule
• History
• Auto control
• System
• Setup
This chapter describes the menu and screen composition of AC Smart you must know to operate AC
Smart.
Control/Monitoring menu is for easily managing many units (air conditioner, ventilator, On/Off device)
possible to commonly control as one unit.
You can control the units in the following units in control/monitoring menu.
• Zone: Logical set of groups to be configured according to installed location or executing function
• Group: Logical set of units to be configured according to installed location or executing function
• Unit: Smallest controlled unit installed at the indoor such as air conditioner or ventilator
The screen shown in control/monitoring can be composed of 3 screens as follows.
• Zone information: Displaying the information about the unit grouped as zone
• Group information: Displays information of unit grouped in group
• Unit information: Displays information of unit
This section describes the screen provided in the control/monitoring menu.
Control/Monitoring menu
To Next Page
Loading...
