3. AC Smart Menu
AC Smart
3-70
Account management
When you press [Account management] button at the top right of the ‘E-mail setting’ screen, ‘E-mail
account setting’ screen is displayed for setting the account to send the e-mail. If the administrator
uses the mail server (SMTP), the said information can be set at the ‘E-mail account setting’ screen.
Note: Activating the [Account management] button
When it is not set as ‘Use’ at the ‘E-mail setting’ screen, [Account management] button is
inactivated.
The following items should be set at the ‘E-mail account setting’.
Type Item Description
User name Enter the user’s name.
E-mail address Enter the user’s e-mail address.
Sending mail server (SMTP)
Enter the mail server address.
Sending mail server port Enter the mail server port.
User name Enter the user name for logging into the mail server.
Password Enter the password to log into the mail server
-
Press [Account setting test] to check whether the
set account is correct or not. The e-mail account
setting can be saved only when this test is passed.
When you log in by using the security password
authentication, check the said check box.
User information
Server information
Log-on information
Setting test
-
Log-on by using the SPA
(Security Password
Authentication)
To Next Page