4. Operating AC Smart
Installation/Owner's Manual
4-135
4. Press the [ ] button, to add the designated group to 'Registered unit'. The applicable unit will be
moved and displayed in the 'Registered unit' list.
5. Click on the [Save] button to save the current setting. Message confirming to save will be displayed
on screen. Click on the [Yes] button.
Press the
[ ]
to move the
designated unit. Applicable
unit will be displayed in the
"Registered unit".
After clicking the [Save] button,
When the "Information" screen is
displayed, click on the [Yes] button
To Next Page