liftup EasyLift - Page 37

INSTALLATION & SERVICE MANUAL – EASYLIFT – UK VERS 1.5
Liftup A/S Hagensvej 21| DK-9530 Støvring | Denmark | T: +45 96 86 30 20 | M: support@liftup.dk | www.liftup.dk | CVR DK-1015 3964
37
How to reset the receiver of the lift
Switch the power to the lift on.
Short-circuit JP1-1 on the connection box board.
When the control LED begins to flash rapidly, the receiver has been reset.
Should the control LED not flash rapidly, this means that no receiver has been paired.