liftup EasyLift - Control Board Wiring for Lift with Lock on Door

INSTALLATION & SERVICE MANUAL – EASYLIFT – UK VERS 1.5
Liftup A/S Hagensvej 21| DK-9530 Støvring | Denmark | T: +45 96 86 30 20 | M: support@liftup.dk | www.liftup.dk | CVR DK-1015 3964
26
Control Board Jumpers JP1
Jumpers are not in use on Secondary side
No
Description
Action
1
Ignore GO
Not used
2
Upper gate SW
Not used
3
IR Stairs
Not used
4
Lower Gate SW
Not used
5
IR Platform
Not used
6
Under Pan SW
Not used
3.7 Control Board Wiring for lift with lock on door
If the lift is supplied with doors, these doors can be supplied with locks*. Locks are only available
for EasyLift 1100 indoor version.
NOTE: The connections illustrated in this chapter are only valid for EasyLift 1100
supplied with lock on the doors. For all other connections, please see section 3.6.
102726 CONNECTION BOARD - EASYLIFT 1100 with lock on door
X1 Power connections to PCB lock
1
Red
Motor (+)
2
Black
Motor (-)
3
Brown
UGSWR
4
Yellow
+5V5
* Supplementary equipment