INSTALLATION & SERVICE MANUAL – EASYLIFT – UK VERS 1.5
Liftup A/S Hagensvej 21| DK-9530 Støvring | Denmark | T: +45 96 86 30 20 | M: support@liftup.dk | www.liftup.dk | CVR DK-1015 3964
7.3 Audible alarms
If “speak” is installed on the lift this will be activated in case of an alarm.
Otherwise an alarm tone will sound.
The vertical safety barrier is opening
The vertical safety barrier is closing
The platform is overloaded
Alarm: Battery fault – the
lift cannot be used
The battery has a fault.
Inadequate power supply (please see
section 5 Technical Specifications)
Alarm: Under pan switch
activated
Remove the object under the lift which is
preventing downward movement
Arriving at top/bottom level
Warning – automatic
operation
A warning before the lift will run auto
return
The lift is in the process of running auto
return
The red emergency stop button has been
pressed in. This must be released in order
that the lift can function again
The lift is locked with a key switch
Power supply is inter-
rupted – connect or press
emergency stop
Connect to a power supply or activate
emergency stop in order to power off the
lift
High tone followed a deeper tone
Low tone followed by higher tone