liftup EasyLift - Replacing Spindle Unit

INSTALLATION & SERVICE MANUAL – EASYLIFT – UK VERS 1.5
Liftup A/S Hagensvej 21| DK-9530 Støvring | Denmark | T: +45 96 86 30 20 | M: support@liftup.dk | www.liftup.dk | CVR DK-1015 3964
51
5.
Unscrew the four screws holding the actuator on the frame and remove actuator.
6.
Mount actuator using this guide in reverse order.
9.1 Replacing spindle unit
1.
Unscrew the four screws and
remove the foot plate under the
actuator.
2.
Unscrew the three screws holding
the spindle unit.