liftup EasyLift - 9 Actuator Replacement; Dismounting Actuator

INSTALLATION & SERVICE MANUAL – EASYLIFT – UK VERS 1.5
Liftup A/S Hagensvej 21| DK-9530 Støvring | Denmark | T: +45 96 86 30 20 | M: support@liftup.dk | www.liftup.dk | CVR DK-1015 3964
50
9. Actuator replacement
9.1 Dismounting actuator
ATTENTION! When the actuators are dismounted, the side covers are not
supported.
1.
Push “lift down” button until the platform is
positioned at lower landing.
2.
Push the emergency stop button.
3.
Remove top cover from the frame.
4.
Disconnect the cable for the actuator.