Lightware MMX6x2-HT200 - Page 75

MMX6x2-HT
User’s Manual
Section 7. LW2 programmers’ reference Page 75 / 119
Network configuration
Operation
See in
chapter
Command
Query the current IP status
7.4.1
{IP_STAT=?}
Set the IP address
7.4.2
{IP_ADDRESS=<type>;IP_ADDRESS}
Set the subnet mask
7.4.3
{IP_NETMASK=<subnet_mask>}
Set the gateway address
7.4.4
{IP_GATEWAY=<gateway_address>}
Set the TCP/IP port
7.4.5
{LW2_PORT=<port_nr>}
Query the status of Ethernet ports
7.4.6
{ETH_ENABLE=?}
Set the status of Ethernet ports
7.4.7
{ETH_ENABLE=<Ethernet_ports>}