MMX8x4-HT series – User's Manual 125
Set the Balance on the Emb. Audio In
Command and Response #balance
ç <bal_set>
æ <bal_set>
Parameters
Parameter description Parameter values
<bal_set> Balance setting R1-R6: Right channel, value can be set between 1 and 6.
L1-L6
0: Center
Example
ç
æ
Audio sound will be transmitted to the left channel of the audio output.
INFO:
Set the Phase Invert on the Emb. Audio In
Command and Response
ç <invertphase_status>
æ <invertphase_status>
Parameters
If the <invertphase_status> parameter is true, the invert phase is on, if it is false the invert phase is off.
Example
ç
æ
For more details about the Phase Invert feature see section.
Set the Duck on the Emb. Audio In
Command and Response
ç <duck_status>
æ <duck_status>
Parameters
If the <duck_status> paramtere is true, the duck function is on, if it is false the Duck function is off.
Example
ç
æ
See more details about the Duck function in the section.
Set the Highpass Filter on the Emb. Audio In
Command and Response
ç <hpf_status>
æ <hpf_status>
Parameters
If the <hpf_status> parameter is truefalse
Example
ç
æ
See more details about the Highpass Filter in the Embedded or Analog Input Channel section.
Set the Lowpass Filter on the Emb. Audio In
Command and Response
ç <lpf_status>
æ <lpf_status>
Parameters
If the <lpf_status> parameter is truefalse
Example
ç
æ
Embedded or Analog Input Channel section
To Next Page
Loading...
Need help?
General
