Lightware MMX8x4-HT Series


9. Firmware Upgrade MMX8x4-HT series – User's Manual 168

Device List

Legend of the Icons

IP address editor The IP address of the device can be changed in the pop-up window.

Identify me 
which helps to identify the device physically.

Favorite device 
connected with that IP address, the star will highlighted in that line.

Further information
available
Device is unreachable. Change the IP address using the


Cleartext login
enabled
  
       Parameters window or in the
appearing window in the beginning of the upgrade.
The Upgrading Steps
ATTENTION!               

upgrade. If any problem occurs, reboot the unit and restart the process.


been chosen in the parameters window, all device settings will be erased. In the case of factory reset, you


Create a backup

computer.
Start the Upgrade

Upgrade

Factory reset


              
           

If the factory default option is selected in the Parameters window, the conversion / restore procedure will
not be performed!
Finish




