MMX8x4-HT series – User's Manual 98
Connection Test
Simple test to see if the connection is established successfully.
Command and Response
{PING}
Example
{ping}
(PONG!)
Compile Time
Command and Response
{CT}
(Complied:
Example
{ct}
(Compiled: May 11 2016 11:01:27)
View Installed Board(s)
Shows the hardware name and revision of the installed card.
Command and Response
{IS}
<MB_DESC>
Example
{is}
The device reports its motherboard (slot 0).
View Firmware for all Controllers’
Command and Response
{FC}
…
Parameters
<s> string which may indicate special versions.
Example
{fc}
(CF MMX8x4-HT420M 1.0.0b15 r17)
The device has one control panel. #rmwareversion
Restart the Matrix Router
The device can be restarted without unplugging power. #reboot #restart
Command and Response
{RST}
Example
{rst}
The device reboots; no response is sent in this case.
Internal voltages and measured temperature values are shown.
Command and Response
{ST}
(ST•<DESC>
Example
{st}
To Next Page
Loading...
