MMX8x4-HT series – User's Manual 88
Settings Menu
Status
General information is shown on this tab, such as device label, part number, serial number and hardware
health, voltage and temperature values.
Status tab in Settings menu
The most important hardware and software related information can be found on this tab: hardware and
be changed to unique description by the Set button.
Please note that the Miniweb-related descriptions can be found in the The Built-in Miniweb section.
Clicking on the Identify me
The feature helps to identify the device itself in the rack shelf.
#devicelabel #label #producttype #rmwareversion #identifyme #status#serialnumber
Network
Network-related settings are available on the tab.
Network tab in Settings menu
General
IP address and DHCP settings can be set on this tab. Always press the Apply settings button to save changes.
Factory defaults settings can be recalled with a dedicated button.
The IP Port Block feature is an additional protection for the Cleartext login, see the Basic IT Security section.
blocked manually. #dhcp #ipaddress #network #portblock
To Next Page
Loading...
