5. Device Concept MMX8x4-HT series – User's Manual 49
The concept
Settings
Matrix: The RS-232 interface of the TPS OUTPUT 1 (P4) is in Command Injection (CI) mode. Set the further
RS-232 Tab section.
TTL Serial
port numbers are 8003 and 8004
TTL* RS-232
Logic low level
Logic high level
Serial Output Voltage Levels (TTL and RS-232)
RS-232 Recognizer
DIFFERENCE:
(delimiter) has arrived or the timeout has come after the last data. The last incoming serial data is stored
and it can trigger an action in Event Manager.
RS-232 Recognizer Example
MMX8x4
ç MMX8x4 (starts the communication on RS-232): PING
æ Login name:
ç MMX8x4 (sends the login name): Admin
æ Password:
ç MMX8x4 (sends the password): Admin
section).
Create the following events in the event manager:
E1.PING' on P1 port of RS-232 to
E2. Set a condition where Login name:
('Admin
E3. Set a condition where Password:
('Admin
For more information about setting the events, see the Event Manager section.
Batch Commands
DIFFERENCE:
message.
LW3 over HTTP (Command Salvo)
Running Macros
most 50 macros can be saved in an MMX8x4 device. See more information about the feature in the Macros
section.
To Next Page
Loading...
