12. Appendix MMX8x4-HT series – User's Manual 184
USB Settings
5
Parameter Setting/Value
Selected USB Host (USB-B port) PC1
Enable
5
In MMX8x8-HDMI-4K-A-USB20 model.
Content of the Backup File
will be overwritten:
Network settings
▪
▪ Static IP address, Network mask, Gateway address
▪ MAC filter allowlist, Port blocking settings
▪
Video ports settings
▪ Port name
▪
▪ Crosspoint state
▪
▪ TPS mode
2
▪
3
1
▪ Audio mode
▪
Microphone and advanced audio settings
2
▪
▪ Phantom Power, Feedback (only for the microphone)
▪ Ducker (only for the advanced audio input channel)
▪ Delay, mono (only for the advanced audio output channel)
RS-232 settings
▪ Port name
▪
▪
▪ Command injection port number
▪ Baud rate, Data bits, Parity, Stopbits, Control protocol
IR settings
▪ Port name
▪
▪
▪ Command injection port number
Ethernet settings
▪
GPIO settings
4
▪ Port name, Direction, Input level
Relay settings
3
▪ Connection state
USB Settings
5
▪ Host select
▪ Power switch delay
▪
Other settings
▪ User EDID data
▪ Emulated EDID list
▪
▪
▪ Device label
▪ Rotary direction, Display brightness, Control lock
▪
1
In MMX8x4-HT420M and MMX8x8-HDMI-4K-A and MMX8x8-HDMI-
4K-A-USB20 models.
2
In MMX8x4-HT400MC and MMX8x4-HT420M models.
3
In MMX8x4-HT420M model.
4
In MMX8x4-HT420M and MMX8x8-HDMI-4K-A-USB20 models.
5
In MMX8x8-HDMI-4K-A-USB20 model.
To Next Page
Loading...
