Lightware MMX8x4-HT Series


 MMX8x4-HT series – User's Manual 78

Ethernet
Ethernet Ports

Ethernet line by each ports: the speed and the duplexity of the connection.
The following settings are available for each ports:
▪ 
▪ Reloading factory defaults.
* Only MMX8x4-HT420M and MMX8x4-HT400MC models have TPS Ethernet port.
** CPU Ethernet port cannot be disabled
The Ports tab in the Control/Ethernet menu
HTTP Clients (HTTP Post and Put Message Sending)
ATTENTION!  This feature means posting or putting HTTP
device. Encrypted transmission (HTTPS) is not supported.
The HTTP Clients tab allows sending HTTP post and put messages to the desired server IP:port no. Control
commands can be set to the target device, but it is not suitable for processing the response (e.g. querying a
 #http
HTTP Messaging section.
HTTP Clients tab in the Control/Ethernet menu
Http header or Http body 



