Lightware MMX8x4-HT Series


 MMX8x4-HT series – User's Manual 143

Sending CEC Commands in Hex Format
ç <port>:sendHex(<hex_code>)
æ <port>:sendHex
Parameters
Parameter Parameter description  
<port> 
port
I1-I4

O1-O2

<hex_code> The desired CEC command Max. 30 character (15 byte) in hexadecimal format.
Example
ç 
æ 

ç <port>
æ <port><CEC_message>
Parameters
Parameter Parameter description  
<port>  I1-I4 or
O1-O2
<CEC_message> The last incoming CEC message
from the connected device.
Example
ç 
æ 
TIPS AND TRICKS:  
sends status information via CEC, it could be a trigger for an action



