MMX8x4-HT series – User's Manual 97
General LW2 Commands
Command and Response#producttype
<command>: <description>
...
Example
{lcmd}
...
INFO: The response is longer, not all the lines can be seen in the example.
View Product Type
The device responds its name.
Command and Response
{i}
(I:
Example
{i}
(I:MMX8x4-HT420M)
View Serial Number
The device responds its 8-digit serial number. #serialnumber
Command and Response
{S}
(SN:
Example
{s}
(SN:00005484)
command, see the section.
Command and Response
(SN:
Example
The device can be controlled with different control protocols. This command queries the active protocol of
the currently used control interface.
Command and Response
<protocol>
Example
View Firmware Version of the Firmware Package
#rmwareversion
Command and Response
{f}
•<s>
Parameters
<s> string which may indicate special versions.
Example
{f}
To Next Page
Loading...
Need help?
General
