MMX8x4-HT series – User's Manual 163
Event Manager Tool Kit
Setting the Delay
ç <loc><time>
ç <loc>
ç <loc>
Setting the Name of the Event
ç <loc><string>
Enable the Event
ç <loc>
Triggering a Condition
ç <loc>:triggerCondition(1)
ç <loc>.ConditionCount
ç <loc>.ExternalConditionTriggerCount
Testing an Action
ç <loc>:ActionTest(1)
Variable-Management
ç <loc><value>
Addition and Subtraction (Add Method)
ç <loc>:add(<operand>;<min>;<max>)
Addition and Subtraction (Cycle Method)
ç <loc>:cycle(<operand>;<min>;<max>)
ç <loc>:case(<min> <max> <val>;)
Scan and Store
ç <loc>:scanf(<path>.<property>;<pattern>)
ç <loc>:printf(%s)
Ethernet Tool Kit
Device Filter Based on MAC Address
ç <loc><MAC_address>;<receive>;<send>;<name>
ç <port_mode>
HTTP Port Blocking
ç <port_mode>
HTTP Post Receiving Blocking
ç <port_mode>
ç MAC_address)
Set Relay Connection Status
ç <relay_port><relay_status>
GPIO Port Settings
Set the Direction of a GPIO Pin
ç <gpio_port><dir>
ç <gpio_port><value>
ç <gpio_port>:toggle()
USB Port Settings
USB Host Select
ç <USB_host>
Power Switch Delay
ç <delay_status>
ç <HostPc>
ç <Device5vEnable><enable>
ç <deviceid>