Page 54 / 107 Section 9. Software control – Using the Lightware Matrix Controller
9. Software control – Using the Lightware Matrix Controller
The device can be controlled using the Lightware Matrix Controller from a Windows PC or
laptop through USB and RS-232 port.
9.1. Installing the Matrix Controller software
Step 1. Run Installer_LW_matrix_controller_v3_4_5.exe
Step 2. Select destination folder and click Install (Using the default path is highly
recommended)
Step 3. If you want to create desktop icon click Yes in the next pop-up window:
Step 4. After finishing the installation the following message appears:
To Next Page
Loading...
